dinesh.godavarty Posted January 15, 2021 Share Posted January 15, 2021 Hey guys, I am in the market for a new tripod, and am thinking of buying used on ebay. I see a lot of Gitzo tripods, and a mix of 3 sections and 4 sections. How do 4 section tripods handle night photography with really long exposures? I just feel I should buy a 3 section, but there could be a perfectly fine 4 section tripod I could be missing out on. Thank you. Link to comment Share on other sites More sharing options...
q.g._de_bakker Posted January 15, 2021 Share Posted January 15, 2021 Depends more on leg diameter. I use (among others) Gitzo tripods of their heaviest series (i forget, is it series 5?) in long and short (1 extra section) versions, and there is no difference in stability, even though the short leg version's last section is of smaller diameter. That smaller diameter still is large enough to have a good, rigid tube. The other thing that could have an effect is the locking/clamping system. Quick locking systems can be quite good. The often inconvenient Gitzo screw collar is excellent. Often too good. Link to comment Share on other sites More sharing options...
Vincent Peri Posted January 15, 2021 Share Posted January 15, 2021 ...The often inconvenient Gitzo screw collar is excellent. Often too good. Decades ago, I was on the verge of buying a Gitzo. I tried the screw collar on one of the legs, and it just wouldn't release - the leg was frozen in the extended position. Needless to say, I never bought a Gitzo tripod! Link to comment Share on other sites More sharing options...
Ed_Ingold Posted January 15, 2021 Share Posted January 15, 2021 3 v 4 sections means little in a Gitzo tripod. There is a bushing at the top of each section which slides with a clearance of about 0.005". Combined with the split bushing in the collor, there is little or no wobble. I prefer 4 sections, because they are taller when open and fold more compactly. I never had a Gitzo bushing jam, but it would be easy enough to clear by removing the collor. Oddly, jams of that sort are usually because of lubrication. Gitzo joints should be dry, with a little silicone grease on the threads at most. More problematic is that the sections would rotate. Newer Gitzo tripod legs are keyed inside so they don't rotate. Bushings in the new G-Loc collars are tapered to deliberately jam, but they're attached to the collar. Loosening the collar pulls the bushing out of engagement. The original bushings are straight, not tapered. Only the inside of the removeable collar is tapered to tighten the joint. Link to comment Share on other sites More sharing options...
JDMvW Posted February 10, 2021 Share Posted February 10, 2021 Depends more on leg diameter. absolutely. I also recommend locks rather than screw collars, but tastes differ. Link to comment Share on other sites More sharing options...
Gary Naka Posted February 10, 2021 Share Posted February 10, 2021 With a GOOD tripod, 3 vs. 4 sections should not be a stability issue. It however could be a logistical issue. If packing size is a consideration, for a given height tripod, the 4 section tripods pack smaller than the 3 section tripods. My small Bogen/Manfrotto 3-section tripod will not fit into my suitcase. It it were a 4 section tripod, it would fit. So for travel, I have to use yet another tripod. Link to comment Share on other sites More sharing options...
AlanKlein Posted February 11, 2021 Share Posted February 11, 2021 I have this Gitzo beast that weighs nine pounds with a pan and tilt head. (see picture) It's about six feet high; no center column. About thirty years old. Has screw type for lower section and this winged handle for the main section. (see link) Nothing moves on it. I use it for my RB67 and Chamonix 4x5 H1. Not at the same time. :) Classic Gitzo G340 Inter Pro Series 3 Studex Performance Tripod - EX+ cond.!!!! | #1790983094 Flickr gallery: https://www.flickr.com/photos/alanklein2000/albums Link to comment Share on other sites More sharing options...
brian_niemi1 Posted February 11, 2021 Share Posted February 11, 2021 I have a 4 section Gitzo tripod that I bought almost 40 years ago for $186.00. The Gitzo head was an additonal $92.00 Fully extended the height is 58" which allows me to stand upright to use it. It is very sturdy and I still use it frequently. Link to comment Share on other sites More sharing options...
heimbrandt Posted February 16, 2021 Share Posted February 16, 2021 Dinesh, I would not worry about three versus four leg sections with Gitzo tripods. I use an old three section G1325mkII carbon fiber tripod with a very heavy camera (a full frame camera with battery grip and a 600mm f/4 lens on a Wimberley head). A four section tripod would do the job just as well. The leg locks did take some time getting used to. I do prefer them to the Bogen/Manfrotto twist locks I was used to as the Gitzo locks are much sturdier. If you are buying used, I would suggest that you look for a carbon fiber tripod. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now