Zone VI modified Pentax spotmeter. Two questions.

I have just purchased a Zone VI modified Pentax digital spotmeter.

Unfortunately, because I bought it used, I have no instructions for

it. So...two questions.

 

1) What's up with the four internal corrective filters? Is there a

way to employ them, or are they employed automatically every time the

meter is used? I am most interested in being able to meter for

infrared film. Is this what the infrared filter is for? If so, how do

I use it?

 

2) Is there any benefit to using a hood on this meter to prevent

flare? If I did, would it matter if the hood vignetted the viewing

area (as long as it doesn't cover the center spot, of course)?

 

O.K., so it was more like a few questions about two seperate topics.

Thanks in advance for any info. It is greatly appreciated.

Michael

 

I have had one and used it for quite some. The filter pack is installed in the meter and therefore will be used each time you use the meter. you can use the meter for infared film. you will need to calibrate it just as you do for regular film. you do not need a hood to prevent flare. just hold your hand over the top of the lens when you use it and that will be sufficient.

 

Kevin

Although it's pretty easy to figure out, if you want a manual for the non-modified model, it's available on the Pentax web site.

Contact Calumet Photo in Chicago. They can help as they bought Fred's company and sill sell Zone VI stuff.