Mike Gammill Posted August 20, 2020 Share Posted August 20, 2020 Greetings all and welcome to our new thread. Post all the images you like from any film camera. I usually keep a small camera (in addition to a rangefinder or SLR) with me, but sometimes I don't finish the film right away. The camera was a Rollei B35 which had Ilford FP4+. I processed the film in Kodak HC110 dilution H. rear entrance to Dorman Hall, Mississippi State, late afternoon Tupelo (city Hall, I think) One of two new construction sites on MSU campus (this may be an engineering building0 clearing trees near Pheba, MS. Taken same day as some images of the area made with a HiMatic 7S new restaurant in West Point (taken just last week) late in the day sitting in Firehouse Subs, note the long line of cars waiting for curbside at Umi (Starkville) That's all for now. As time permits I'll add more from some film that I will be processing soon. Looking forward to seeing everyone's images. 5 Link to comment Share on other sites More sharing options...
James Bryant Posted August 20, 2020 Share Posted August 20, 2020 Dan Lawson Place, Cades Cove, Great Smoky Mountains National Park, USA, 1991. Zone VI view camera, Schneider 120 Super Angulon len s. 5 Link to comment Share on other sites More sharing options...
James Bryant Posted August 20, 2020 Share Posted August 20, 2020 Methodist Church, Cades Cove, from Rich Moutain Road, 1991. 4x5 view camera. 5 Link to comment Share on other sites More sharing options...
James Bryant Posted August 20, 2020 Share Posted August 20, 2020 Cable Mill, Cades Cove, GSMNP, 1991. 4x5 view camera. 5 Link to comment Share on other sites More sharing options...
James Bryant Posted August 20, 2020 Share Posted August 20, 2020 Ferns, GSMNP, 1991. 4x5 view camera. 5 Link to comment Share on other sites More sharing options...
James Bryant Posted August 20, 2020 Share Posted August 20, 2020 Laurel Falls, GSMNP,1991. 4x5 view camera. 5 Link to comment Share on other sites More sharing options...
Rick_van_Nooij Posted August 20, 2020 Share Posted August 20, 2020 Apartments making way for new apartments K.W. Patent Etui (6.5x9), 10.5cm f/4.5 Tessar, Expired Rollei Retro 80s (in an early Plaubel Makina roll film back). At the 'World Tree' Kodak Bantam, 47mm f/4.5 Anastigmat Special, Expire unknown color film with 45-minute Stand Development in HC-110 (1:160) 5 Link to comment Share on other sites More sharing options...
m42dave Posted August 20, 2020 Share Posted August 20, 2020 (edited) Last two from the Zenit 12XP, MC Industar-61 L/Z 50/2.8, Ektar 100. The I-61 L/Z has a useful minimum focusing distance of just under 0.3m, though being preset makes it a bit hard to use for handheld shots at such close range. Lichens Edited August 20, 2020 by m42dave 5 Link to comment Share on other sites More sharing options...
m42dave Posted August 20, 2020 Share Posted August 20, 2020 Tiny Flowers 5 Link to comment Share on other sites More sharing options...
Bill Bowes Posted August 20, 2020 Share Posted August 20, 2020 Fed-3 / Industar 61, UFX 400, Hypercat & V600 scan. Aloha, Bill 5 Link to comment Share on other sites More sharing options...
erko_podbicanin Posted August 20, 2020 Share Posted August 20, 2020 5 Link to comment Share on other sites More sharing options...
erko_podbicanin Posted August 20, 2020 Share Posted August 20, 2020 Yashica C 5 Link to comment Share on other sites More sharing options...
erko_podbicanin Posted August 20, 2020 Share Posted August 20, 2020 5 Link to comment Share on other sites More sharing options...
rick_drawbridge Posted August 20, 2020 Share Posted August 20, 2020 Some from a Nikon F4 using a newly-acquired Tamron 28-105mm f/4-5.6 (IF) lens. The film was Ilford Delta 400 developed in PMK Pyro. Craft Bar In Case of Fire Mid-Century Grim Planter Testing the Tamron #3 1925 5 Link to comment Share on other sites More sharing options...
Dieter Schaefer Posted August 21, 2020 Share Posted August 21, 2020 Leica M5, Summicron-M 90/2, Kodak BW400CN 5 Link to comment Share on other sites More sharing options...
mark45831 Posted August 21, 2020 Share Posted August 21, 2020 Nikon Ft3 105mm 2.5 Tmax 100 in Rodinal 4 Link to comment Share on other sites More sharing options...
Tony Evans Posted August 21, 2020 Share Posted August 21, 2020 Contax RTS II with Planar 50/1.7 on Kentmere 100 in Pyro HD. RESCUE DOCK. SAPLINGS. DOUGLAS & CEDAR. CENTENNIAL TRACK. One with the Sonnar 135/2.8. CHIMNEY-TREE. 5 Tony Evans Link to comment Share on other sites More sharing options...
kmac Posted August 22, 2020 Share Posted August 22, 2020 Kodak 2A Model B Hawkeye with Tominon 105mm f4.5 lens - 70mm Konica-Minolta 160 expired 2007 developed in Russian Cine-Mech C41 3 bath chemical kit. Handheld, 30thsec at f22 using cable release. Epson V800, Vuescan. (wow what a mouthful). I made a long flat jig to roll my own 70mm film, so I can now expose both 120 and 70mm in this old Hawkeye folder. It's been an interesting and fun journey. Sandstone Inn 1871 5 Link to comment Share on other sites More sharing options...
rick_drawbridge Posted August 22, 2020 Share Posted August 22, 2020 Some from a series of architectural abstracts from a Mamiya 645 1000S with the Mamiya Sekor C 55-110mm f/4.5 lens. The film was Ilford HP5 Plus developed in PMK Pyro. Scans from a Epson V800 Photo using Silverfast software. Illusions #3 Junction Abstract Stroke Illusions Descent 5 Link to comment Share on other sites More sharing options...
greg_nixon2 Posted August 23, 2020 Share Posted August 23, 2020 Kodak 2A Model B Hawkeye with Tominon 105mm f4.5 lens - 70mm Konica-Minolta 160 expired 2007 developed in Russian Cine-Mech C41 3 bath chemical kit. Handheld, 30thsec at f22 using cable release. Epson V800, Vuescan. (wow what a mouthful). I made a long flat jig to roll my own 70mm film, so I can now expose both 120 and 70mm in this old Hawkeye folder. It's been an interesting and fun journey. Link to comment Share on other sites More sharing options...
greg_nixon2 Posted August 23, 2020 Share Posted August 23, 2020 Could you share detail of the jig you made. I have made a also. I will take some photos and post them back here. 1 Link to comment Share on other sites More sharing options...
greg_nixon2 Posted August 23, 2020 Share Posted August 23, 2020 Here's the jig that I made. It has two levels. The paper is pulled through the bottom level which is slightly wider than the top level. There is a pin that the rolled up backing paper sits in. Its just there to keep the roll from bunching up. The jig, paper and the long roll of new film is placed in the dark bag. Film from the long roll at the top and the paper from the bottom are rolled together as they both come through. 2 Link to comment Share on other sites More sharing options...
kmac Posted August 23, 2020 Share Posted August 23, 2020 Here's the jig that I made. It has two levels. The paper is pulled through the bottom level which is slightly wider than the top level. There is a pin that the rolled up backing paper sits in. Its just there to keep the roll from bunching up. The jig, paper and the long roll of new film is placed in the dark bag. Film from the long roll at the top and the paper from the bottom are rolled together as they both come through. That jig looks alright Greg. Do you have concerns about the film getting scratched ? That's what was on my mind so I decided to lay the film flat on the backing paper first. I made guides designed to keep the film central on the backing paper and glued the guides to a 1.5mt long board. In room light, I lay the backing paper in between the guides on the board and clamp down the ends of the paper. The guides have 0.3mm X 1.5mm recesses at the bottom of them to allow the backing paper to slip into. The main space left between the guides is the same as the width of the film, the film is then centralized all the way along the backing paper via the guides. With lights turned off, I lay the film in the guides and cut it with a special cutter I made, at exactly one meter. I then start rolling the film with a spool on the end. The backing paper pulls out from the 1.5mm recesses as I'm rolling the film, and when it nears the end, I tape it. I've rolled two films so far and each one took about five minutes to do once the backing paper was laid on the board. Link to comment Share on other sites More sharing options...
luis triguez Posted August 23, 2020 Share Posted August 23, 2020 Canon IIb. Canon Serenar 5 cm. Kodak Panatomic-X (ISO 32) and a bit of PS :rolleyes: 5 Link to comment Share on other sites More sharing options...
greg_nixon2 Posted August 23, 2020 Share Posted August 23, 2020 (edited) That jig looks alright Greg. Do you have concerns about the film getting scratched ? That's what was on my mind so I decided to lay the film flat on the backing paper first. I made guides designed to keep the film central on the backing paper and glued the guides to a 1.5mt long board. In room light, I lay the backing paper in between the guides on the board and clamp down the ends of the paper. The guides have 0.3mm X 1.5mm recesses at the bottom of them to allow the backing paper to slip into. The main space left between the guides is the same as the width of the film, the film is then centralized all the way along the backing paper via the guides. With lights turned off, I lay the film in the guides and cut it with a special cutter I made, at exactly one meter. I then start rolling the film with a spool on the end. The backing paper pulls out from the 1.5mm recesses as I'm rolling the film, and when it nears the end, I tape it. I've rolled two films so far and each one took about five minutes to do once the backing paper was laid on the board. I haven't had any problem with scratching the film, so far at any rate. I have similar jigs for different film sizes. The method that you describe would involve less movement of the film once it's in the jig. I will try and make one like that the next time I roll 116/70mm film. I forgot to mention in the last post, that I had to make up a 70mm film hanger for the processor's dip and dunk tank. Apparently the tank is not deep enough for a roll of 116 film. Edited August 23, 2020 by greg_nixon|2 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now