diegobuono Posted May 14, 2014 Share Posted May 14, 2014 Few days ago I started using my "new" (bought used) flextight 646, after 10 scan the scanner started doing weird noise while charging the film holder , gave me message like "white balance underexposed" or (alternatively) "no film holder" (Intraslated the messages from italian, so could be a little differnt from the original english message); at that poiht I have been able to scan just another frame but it came out not center3d on the area selected, like if the film holder slipped during the feeding. The seller told me to bring it to the hasselblad repair center (where it has been serviced before it was put on sale), the repairman checked it, they scaaned some films and it seems that all works properly). Now I will try it again but I'm wondering what happened, (the seller when I called on the phone an let him hear that weird noise, talked about a "friction" and "springs"). Any clue?Thank you in advance,Diego Link to comment Share on other sites More sharing options...
marco_ristuccia Posted May 14, 2014 Share Posted May 14, 2014 <p>Hi Diego,<br /> I know of problems with transmission belts on some Imacon scanners when they went old, but I haven't a personal experience on that problem.</p> <p>I have also read that it should be relatively simple to open the scanner's sides and check/change the belts by yourself. They are of standard sizes and should be relatively easy to find on the net.</p> <p>There is a Yahoo group called "IMACONUSERS" focused on Imacon scanners and users, I strongly suggest you to subscribe and dig the archived messages. It's an incredible source of help and learning.</p> <p>Here is the link:<br /> https://groups.yahoo.com/neo/groups/IMACONUSERS/info</p> <p>Best,<br />Marco</p> 1 Link to comment Share on other sites More sharing options...
diegobuono Posted May 16, 2014 Author Share Posted May 16, 2014 After many scans finally the repairman too incurred in the problem so he filmed the problem and sent to hasselblad to receive some input becsuse he recently serviced thatvscanner and never seen this problem. I will let you know how it will end. Link to comment Share on other sites More sharing options...
zackhelwa Posted November 20, 2018 Share Posted November 20, 2018 After many scans finally the repairman too incurred in the problem so he filmed the problem and sent to hasselblad to receive some input becsuse he recently serviced thatvscanner and never seen this problem. I will let you know how it will end. Hi Diego, I was wondering if you ever figured out what the problem was asI am having a similar issue. thanks Link to comment Share on other sites More sharing options...
diegobuono Posted April 9, 2020 Author Share Posted April 9, 2020 Sorry for the (great) delay in answering, finally the scanner went to Hasselblad Sweden and came back ok. I do not know what the problem was. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now