Jump to content

W/NW 2018 Pic-O'-The-Week #1


Uhooru

Recommended Posts

So welcome. this is simultaneously both the last thread of this year and the first thread of next year. So lets look back and celebrate the year by posting 5 photos depicting work you liked last year. I'll start with one pic but will add more later. Here we go!

 

18448085-orig.jpg

  • Like 4
Link to comment
Share on other sites

Sorry again, I should add, FP4 developed in infosol 3, scanned on an epson flatbed. Here in the rural hinterland of New South Wales (we have electricity, and most people most of the time wear shoes), the range of available film options (outside ebay), is limited. Again, look forward to further contributions. richard a, yours are hauntingly evocative images. Tell me, how did you do them? The variable focus is haunting. And bertliang, wonderful landscapes - they are good. Regards, Arthur (apiarist1)
Link to comment
Share on other sites

After a two week lapse, my Kailua Farmers Market was up this sunday. . . stocked up on some fruit & pupu's (snacks) for the NYE celebration. . . (Mac nuts are always good), also ran a roll of Kentmere 400 thru the Fed-2/Jupiter-8 combo. PyrocatMC developed & V600 scan. Aloha, Bill800923494_2k17-126-016ces5bc.jpg.44e8b678abdbc385062a38ea93fca25e.jpg Edited by Bill Bowes
  • Like 1
Link to comment
Share on other sites

580228948_DSCF6514ffr-vertcombi-horzmerge.thumb.jpg.4a1667a6c415e1fcc40fb6123ff5fecb.jpg Hello everyone. I rate the Ultrafine emulsions: 400 @ 250asa, the 100 material @ 80asa. 99% of my exposures are reflective from a Gossen Pilot (selenium) handheld meter. Years of Zone work give great results, but if in doubt will compare a palm reflective (Zone 6) against an Incidence metering (Pilot can do both).

My developing is with Obsidian Aqua or more recently, Pyrocat HD or MC. 3ml of A & B if the Pyrocat or 1ml of the OA, with 16min being "my" standard time. +/- 1min for each Zone difference. Neg material stains nicely & density is gauged against wet printing of ages gone by. I only use a 450ml Nikor stainless steel tank, with spacers for a single roll of 35mm to keep the film in the middle of the tank. 120 material has a thin spacer on the bottom only. 3 min pre-soak with DI water & non-acid fixer only. Presently using an Epson V600 for scans. To use the "old" saying, "try it...you will like it!" Aloha, Bill

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...