rajmohan. Posted May 5, 2017 Share Posted May 5, 2017 Hello LF photographers, I'm considering acquiring a Sinar Norma 4x5 camera, and have been trying to find which (if any) models of 120 roll film backs it will accommodate. I've read that some of the early Normas did not have a standard back, and therefore would not accept roll film backs without modification. Many thanks, Raj Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted May 6, 2017 Share Posted May 6, 2017 You need to make sure it has an "International" or Graflok back. Identified by two sliding clips that hold rollfilm and Polaroid backs, etc. in place of a removeable ground-glass screen. The screen itself should be held in place by serrated clips that can be depressed with your thumbs to release the screen. A fixed screen (AKA spring back) means you can't fit interchangeable backs and holders to the camera. If you Google images of "graflok back", you'll see what I mean. Link to comment Share on other sites More sharing options...
bob_salomon Posted May 6, 2017 Share Posted May 6, 2017 If it has a non-removable ground glass then you can use slip in roll film holders like a Linhof Rapid Rollex, these types of holders slide into the camera the same way a sheet film holder does. Link to comment Share on other sites More sharing options...
rajmohan. Posted May 6, 2017 Author Share Posted May 6, 2017 Joe and Bob - thank you. I'll examine the camera more closely when I get the chance and look for the points you mention. Link to comment Share on other sites More sharing options...
neil_poulsen8 Posted May 22, 2017 Share Posted May 22, 2017 If you don't have a Norma back that conforms to the Graflex standard, you can find one. I'm not sure if this is true about all Normas, but mine will accept Sinar F backs. Once you find one that conforms to the above standard, you can use the 4x5 roll-film adapters that are available on EBay. 1 Link to comment Share on other sites More sharing options...
rajmohan. Posted May 25, 2017 Author Share Posted May 25, 2017 Thank you, Neil. I managed to find a way to make the Graflok backs work on the Norma. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now