francis_t Posted July 22, 2014 Share Posted July 22, 2014 <p>This is the lens that came out just before the D version. The one I have was purchased new probably around the year 91 or 92. I really can't provide anymore specific information. I have the lens in front of me but don't see any serial any other type of ID numbers. When I first had it, it was paired with an F4s. I had purchased from Kirk Photo a collar with a tripod mount that attached the lens to the camera. I've since replaced the F4s with a D7000. Kirk Photo seems to have a lens collar but they emphasize it's for the D version only. Looking at some Q&A's it seems doubtful that it would work on my lens. So my question is, and I know this lens is quite long in the tooth, does a lens collar or any type of support exist for this lens? Note: I checked the Really Right Stuff site and they don't seem to have anything. <br>Thank you.</p> Link to comment Share on other sites More sharing options...
ellis_vener_photography Posted July 22, 2014 Share Posted July 22, 2014 Is this the push/pull version? As the old folk say "back in the day" I used a platform mount made by Kirk Enterprises. It had a collar that went around the front part of the lens barrel and the back end of the plate screwed into camera's tripod socket. Link to comment Share on other sites More sharing options...
jim_momary Posted July 23, 2014 Share Posted July 23, 2014 <p>Serial numbers are typically small and engraved, nearly black on black. A lot of lenses have the numbers on the barrel near the lens mount (underside). Sometimes tough to see without the proper lighting and a magnifier.<br> Jim</p> <p>Go here to try to match up a photo for ID purposes of 'naming' ...<br> http://www.photosynthesis.co.nz/nikon/lenses.html</p> Link to comment Share on other sites More sharing options...
francis_t Posted July 23, 2014 Author Share Posted July 23, 2014 <p>Ellis, yes it is the push/pull version. <br> Jim, after further digging I did find a serial number on my lens. <br> This is the lens I have<br> http://www.photosynthesis.co.nz/nikon/af80200.jpg</p> Link to comment Share on other sites More sharing options...
Andrew Garrard Posted July 24, 2014 Share Posted July 24, 2014 <p>If you're really worried about it, the Really Right Stuff <a href="http://www.reallyrightstuff.com/s.nl/sc.26/category.621/it.C/.f">long lens support</a> (heh, they actually have a photo with an 80-200!) would support the lens, though it's not exactly cheap - but it's a generic solution, so at least you can use it for multiple lenses. I tend to think of that arrangement as being for longer lenses, and I tend to think of the 80-200 as being designed to be supported by the camera (although it's certainly at the upper limit of that being a good idea), but I can understand why you might worry about the mount being wrenched off your D7000 in bad conditions.<br /> <br /> Kirk's lens collar looks, if I'm identifying it correctly, like it's for the <a href="http://www.mir.com.my/rb/photography/companies/nikon/nikkoresources/AFNikkor/AF-Nikkor80200mm/index1.htm">mk2</a> lens, which is rarer - as far as I can tell - than the <a href="http://www.mir.com.my/rb/photography/companies/nikon/nikkoresources/AFNikkor/AF-Nikkor80200mm/index.htm">Mk1</a> or (two-ring) <a href="http://www.mir.com.my/rb/photography/companies/nikon/nikkoresources/AFNikkor/AF-Nikkor80200mm/index3.htm">Mk3</a> (huh, is mir.com.my having trouble? seems slow...) - the controls did move a bit, so maybe there's a problem. You could ask Kirk nicely!<br /> <br /> HTH.</p> Link to comment Share on other sites More sharing options...
Ron Sosnowski Posted February 25, 2017 Share Posted February 25, 2017 francis Francis_t, did you ever find a solution for a mount for the non-D 80-200 mount? I have the same issue. Link to comment Share on other sites More sharing options...
Ed_Ingold Posted February 26, 2017 Share Posted February 26, 2017 The non-D lens had a push-pull zoom, and did not come with a collar or foot. Really Right Stuff has the components you could use to support the lens (http://www.reallyrightstuff.com/Quick-Release/Multi-Purpose-Rails-Packages/CameraBarsandPackages). <p>You would need a long rail, a clamp to mount on that rail, and a lens support. You would also need a Arca-style plate for the camera. This assembly would be adjustable so that the lens could be supported on a fixed portion of the barrel. <p>It's not an inexpensive solution, but cheaper than a new or used lens, and useable for other long lenses too. Link to comment Share on other sites More sharing options...
Heritage Cameras Posted February 26, 2017 Share Posted February 26, 2017 There's a cheaper option, and the manufacturer's product page even seems to show it attached to the 80-200/2.8: https://www.manfrotto.co.uk/telephoto-lens-support Link to comment Share on other sites More sharing options...
2Oceans Posted February 27, 2017 Share Posted February 27, 2017 Francis, I used to have a nice one with an integrated acra style plate made by a company called D&L or P&L ? for my non D 80-200. Not sure if they are still around. Kirk made/makes one. I would call Kirk up and ask or call B&H. B&H carries a Kirk collar for the 80-200 push pull and can tell you if it will work with the non D version. This forum blog has pictures of both. https://www.dpreview.com/forums/thread/3121450#forum-post-40217705 They look similar except for the front length, focus limiter, and crinkle finish on the D version You might order one and try it out on your lens and return it if it doesn't work. Good hunting. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now