apostolos_tournas Posted October 27, 2016 Share Posted October 27, 2016 <p>Hi,<br> The strap all along the right-hand side of the frame, Is that a light leak? The entire neg roll, taken with a 2.8GX, shows such a strap.<br> Thanks,<br> Paul</p> <div></div> Link to comment Share on other sites More sharing options...
fwstutterheim Posted October 27, 2016 Share Posted October 27, 2016 <p>Paul,<br> I have had a similar problem now and then. In my case it was caused by myself when I was a bit careless with feeding the backing paper onto the take up spool. It was not positioned right in the middle but shifted to one side. That leaves some open space at the other end of the spool and it caused a light leak. It often evened out after a few frames. Could this have happened to you?<br> Ferdi.</p> Link to comment Share on other sites More sharing options...
russ_britt3 Posted October 27, 2016 Share Posted October 27, 2016 <p>To test if its a light leak (I am assuming you mean around the film door) you can put tape (something that will be easly removed without leaving glue) maybe like drafting tape around the door seals. If you shoot film with the seals taped and do not get this then yes it's the seals. But on a camera like that I would think the seals last a very long time? <br />This is how I found I had light leaks on my Hasselblad magazines back in the 80s....and which mags leaked.<br />Higher speed films have more light leak problems.....and the slower you shoot the rolls also adds to the problem.<br />Have fun with that camera......film rules.</p> Link to comment Share on other sites More sharing options...
d_purdy Posted October 27, 2016 Share Posted October 27, 2016 <p>Light leaks don't cause dark areas, they cause light areas. You have a lack of density in the dark band on the right. Might be caused by insufficient developer in the tank to cover the film on the reel. Otherwise it is caused by something blocking the light in the camera.</p> Link to comment Share on other sites More sharing options...
Robin Smith Posted October 28, 2016 Share Posted October 28, 2016 <p>Yes; as Purdy states. I suggest the reel slipped up and out of the developer during development or, put another way, the volume of developer was not great enough to bathe the whole film adequately.</p> Robin Smith Link to comment Share on other sites More sharing options...
apostolos_tournas Posted October 29, 2016 Author Share Posted October 29, 2016 <p>Thanks to all for your comments.<br> Purdy and Robin, that's a particularly clever suggestion! I'll check the development step.<br> Paul</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now