Jump to content

Help - How can i remove Flash reflection from a Photo?


anthony_w.

Recommended Posts

<p>I have a Photo that i took some time ago of a Uniform in a glass case.<br />Unfortunately, the flash has left a white spot as it reflected off the glass.<br />Is there anyway i can remove this?<br>

Thanks :)<br>

---------------------------------------------------------------<br /><br />File information:<br /> Local path: C:\TEMP\Uniform Edit.jpg<br /> File name: Uniform Edit.jpg<br /> File size: 174,914 Byte<br /><br />Image information:<br /> Software: Elements Organizer 10.0<br /> Created: 07/23/2011, 12:02:43<br /> Digitalized: 07/23/2011, 12:02:43<br /> Modified: 09/09/2014, 22:51:33<br /> Image size: 576 x 768 Pixel<br /> Horizontal res.: 72 dpi (dots per inch)<br /> Vertical res.: 72 dpi (dots per inch)<br /> Compression: 0 Bits/Pixel<br /> Description: Rolf Niehoff Pilots Uniform..jpg<br /> EXIF version: 12.2<br /> FlashPix ver.: 0.1<br /><br />Camera information:<br /> Manufacturer: OLYMPUS IMAGING CORP.<br /> Model: FE-120,X-700<br /><br />Camera settings:<br /> Flash light: Not used<br /> F-Nummer: F 3.6<br /> Max. aperature value: F 1.1<br /> Exposure time: 1/30 sec.<br /> Focusal length: 6.0 mm<br /> Exposure program: Automatic control<br /> Metering mode: Center<br /> Light source: Auto<br /><br /><br>

<img src="http://s21.postimg.org/uv04d2crb/Uniform_Edit.jpg" alt="" width="576" height="768" /></p>

<p> </p>

Link to comment
Share on other sites

<blockquote>

<p><a href="/photodb/user?user_id=19592">Jeff Spirer</a><a href="/member-status-icons"><img title="Moderator" src="/v3graphics/member-status-icons/mod.gif" alt="" /><img title="Subscriber" src="/v3graphics/member-status-icons/sub10plus.gif" alt="" /><img title="Frequent poster" src="/v3graphics/member-status-icons/1roll.gif" alt="" /></a>, May 29, 2015; 10:52 a.m.</p>

 

<p>What image processing software do you have?</p>

 

</blockquote>

 

 

 

<blockquote>

<p>I have Serif PhotoPlus Essentials and Gimp.</p>

</blockquote>

Link to comment
Share on other sites

<p>If the budget is tight, check out Cyberlink Photo Director 5 - it may still be available free. I tried it a few weeks ago when it was free because verison 6 had replaced it. There's a pretty good content aware tool for covering up some flaws. Overall I didn't like it well enough to consider it as a serious replacement for Lightroom, but it's decent as a freebie.</p>

<p>Otherwise, if you have several photos that need similar retouching, try downloading a trial version of Lightroom, Photoshop, etc. These are fully functional and most trial versions are good for 2-4 weeks, and allow saving the edited file to full resolution TIFFs, JPEGs, sometimes to DNG or other formats.</p>

Link to comment
Share on other sites

<p>You can not remove the glare since the light in that spot has been completely dominated by the flash. </p>

<p>The best you can do is to reconstruct the image by filling in the bright center spot - cloning is one method. </p>

<p>The flash also produced a bright halo surrounding the center spot; this can be somewhat softened through careful blending and feathering by applying brightness and contrast tools in the area.</p>

Link to comment
Share on other sites

<p>The healing tools in Photoshop and Lightroom are a sort of smart cloning. They sample nearby regions automagically, or as selected by the user, and attempt to seamlessly weave the sampled region into the target area. Usually it works pretty well, but on a tough job like this it may require several steps, building up a little at a time while sampling from various parts of the jacket.</p>

<p>The overhead glare on the glass will be easier. It should sample from the white background wall, both the lighted and shadowed areas.</p>

Link to comment
Share on other sites

<p>Just a word of caution when taking flash photos such as this in the future. Its always better, if possible, to shoot at a slight angle, when photographing through glass. That way, the reflection does not come directly back at you.</p>
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...