Jump to content

My Canon 5DM2 wont turn on with a specific card


mi_ki

Recommended Posts

<p>When I insert my Transcend card in my 5DM2, the camera wont turn on. It worked before with this card, but now (after I used the card for some data transfers) it doesnt. When I insert my second (SanDisk) card, everything is ok. When I insert the "bad" Transcend card in my Olympus camera, there is no problem. What is going on?</p>

 

Link to comment
Share on other sites

<p>Step 1: Remove card from camera.<br>

Step 2: Power on camera without card.<br>

Step 3: Insert card in camera.<br>

Step 4: Format Card in Camera.<br>

Step 5: Power off camera.<br>

Step 6: Power on Camera.<br>

If camera power up ok: Assume card is ok and the issue was that the data transfer operations overwrote a memory location to a state that when read at camera power up caused the camera to not power up. Continue to use card as though nothing had ever happened.<br>

If camera fails to power up: Mark card as no good for use in the camera, and continue to use it in devices where it functions normally.</p>

Link to comment
Share on other sites

<p>William, I'd be inclined to agree with you too, except that cards are so cheap, and cameras are so expensive, it's not worth the chance, except maybe in an old 10D.</p>

<p>FAIW, I've seen this exact behavior (somewhat commonly) in computers. A single bad RAM chip would keep the computer from even powering up.</p>

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...