timothy_lefkowitz Posted September 7, 2012 Share Posted September 7, 2012 <p>Hey everyone</p><p>I just got a broken coolscan 8000 off ebay. I have a couple of questions and really need help! First I repair gaming consoles on the side. 90% of the time it is a heat sink/capacitor/resistor issue. After opening the scanner this thing looks PERFECT. These capacitors are in great shape. the scanner looks like its been hit in some way. not major but just enough to bend the case. It seems like the case works as a ground. When I power the unit on it makes a hiss sound. Is this because the ground connection isn't strong enough? </p><p>The power button is a issue. when I remove the spring on the rod for the power botton it will turn on after a few trys. I haven't gotten past this because I would like to fix this step by step. Any advice would be great. </p> Link to comment Share on other sites More sharing options...
rnt Posted September 7, 2012 Share Posted September 7, 2012 <p>Well, it has a mechanical mechanism. The hit may have jammed the rails that the sensor moves along or done other damage. The hiss may be the sound of stepping motors trying to step. Make sure that all the mechanicals move more or less freely before you assume it's an electronic problem.</p> Link to comment Share on other sites More sharing options...
timothy_lefkowitz Posted September 7, 2012 Author Share Posted September 7, 2012 <p>I was thinking this at first but I'm pretty certain the hiss is coming from the power supply board. If I hold the power cord in it sometimes doesn't make the hiss and turn on. I don't know if thats because the back of the case is pushing against the ground metal right behind it or what</p> Link to comment Share on other sites More sharing options...
timothy_lefkowitz Posted September 7, 2012 Author Share Posted September 7, 2012 <p>BTW: It did start twice where I could hear it really boot up. Not just blink for 30 seconds and do nothing but actually move back and forth on the rails. I got very excited but then the power just gave out. </p> Link to comment Share on other sites More sharing options...
yuri_yupiter3 Posted September 8, 2012 Share Posted September 8, 2012 <p>Locate the several DC voltage outputs/ rails on the power supply and boards. Monitor these after turn on. All it takes is one bypass cap to short out and the voltage rail will be wrong/lower/ or zero.</p> <p> </p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now