Elinchrom sky-port not working

I have a dlite4 connected to it the receiver. When I use the transmitter to test it works just fine. But it won't change the power when using

the plus or minus buttons. It's kind of frustrating am I missing anything?

<p>If I'm not mistaken, the Skyport functionality on the D-Lite 2 and 4 is limited to triggering only. In other words, you can't control the power of the D-Lite 4 with the Skyport. I believe the D-Lite 4 it DOES include support for power adjustments.</p>

<p>I have a D-Lite 4it and it doesnt work with that either :(</p>

<p>My mistake - the D-Lite series (including the D-Lite it) only offers wireless triggering using the SkyPort system. Additionally, you can configure frequency channel setting (in the 2.4Ghz range) and group settings.</p>

<p>Thanks Jerry. I wish I had known this when I bought them (3) :( ... do you know which model supports this ?</p>

<p>BXRi and the Style RX definitely support power increases and decreases using the SkyPort transmitter. Also works on the Ranger RX and Quadra pack-and-head systems. The Style RX and Ranger also support full functionality using the SkyPort USB Transmitter with SkyPort software - it's quite useful!<br>

Elinchrom just updated the SkyPort transmitters with the introduction of the SkyPort Speed transceiver, which supports sync speeds up to 1/250sec (in addition to some other nice new features)</p>

<p>Elinchrom has new versions of the D-Lite monolights that have Skyports built in, just like the BXRi series. They also have stronger stand mounts.</p>

<p>Yes, The Dlite4 has it built in, but even that one doesnt allow me to power/up down. only fire the strobe.</p>