Jump to content

Contax G2 problem


mat_levine

Recommended Posts

so i just got a contax g2, but i am having some trouble. when the lens is on the camera the shutter will not fire, it wont autofocus, and the viewfinder doesn't display the f-stops. when i take it off it all works perfectly. any ideas?<!-- IBF.ATTACHMENT_3392788-->
Link to comment
Share on other sites

<p>Well the obvious is low batteries and a properly mounted lens. That said, I have seen problems where users, unfamiliar with the lens mounting system, have accidentally damaged the gold contacts on the lens. Check the nine contacts. They should be clean and undamaged. Make sure you have nine.</p>
Link to comment
Share on other sites

<p>You may have a problem with the AF- lens interface that would require the chip in the lens t be replaced. I had a similar problem once with the G2 and it turned out to be a fault of the 28mm lens chip. You didn't say whether other lenses cause the same issue, but if it's only one, I'd take a look at the lens first.</p>
Link to comment
Share on other sites

<p>mat, the G2's shutter doesn't fire when the dial at the top left is set to double exposure (double frame icon). this sometimes happens by accident and after two exposures have been taken, the shutter release doesn't respond until you return the dial to single frame or another setting. (at least, that was the case when I bought my G2 second hand - also kept wondering why it didn't work). by the way, the viewfinder display only shows exposure times and distance.</p>
Link to comment
Share on other sites

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...