jeremy_dando Posted September 3, 2007 Share Posted September 3, 2007 Hi Gang; What is the "best" method for transfer images from the camera to my computer? Cable or removing the CF card? I can plug the cable into a USB 1 port on the computer or remove the card and plug it into an Epson RX 620 printer with card reader slot (also USB 1 to the computer). Thanks in advance, jeremy Link to comment Share on other sites More sharing options...
dave_lewis Posted September 3, 2007 Share Posted September 3, 2007 It will be faster just to take the CF card out of the camera and use a dedicated card reader to do it (cost: $10 or so). It saves your camera battery life too. Link to comment Share on other sites More sharing options...
frank_kimble Posted September 3, 2007 Share Posted September 3, 2007 I don't like taking the CF card in and out. I just connect the USB cable and kickoff the download. May take a couple minutes but I have plenty to do while its transfering the files. Like browsing PN! If I fill up a CF card and swap it out during a session, then it goes in the card reader. Link to comment Share on other sites More sharing options...
William Kahn Posted September 3, 2007 Share Posted September 3, 2007 If you have USB-1, I'm not sure using a card reader would be much faster than uploading directly from the camera. Try them both, and see. If you're careful about removing/inserting the card, using a reader should be no problem.... Link to comment Share on other sites More sharing options...
gdanmitchell Posted September 3, 2007 Share Posted September 3, 2007 Card readers are cheap and fast. I use a firewire model. William Kahn has a good point - USB 1.0 isn't that fast. It may be a _bit_ faster via the card, but perhaps not all that much. Since I shoot a 5D in RAW mode, my transfers often are measured in GB rather than MB. The firewire reader is quite fast (as would be a USB 2.0 reader) but I still tend to start the transfer and then go doing something else for a few minutes. Dan Link to comment Share on other sites More sharing options...
my site Posted September 3, 2007 Share Posted September 3, 2007 Using a card reader is faster and it prevents the possibility of you or someone else accidentally getting tangled with the cord coming from the camera causing your camera to meet the floor. Joe Link to comment Share on other sites More sharing options...
colinsouthern Posted September 3, 2007 Share Posted September 3, 2007 If you're only running USB v1 then consider purchasing a V2 PCI card (if you have a spare slot) - the difference in speed is "night and day". Link to comment Share on other sites More sharing options...
steve_dunn2 Posted September 3, 2007 Share Posted September 3, 2007 <p>Indeed, unless you have all day to wait (or only a couple of images to download), you need better than USB 1. Add a USB 2 card to your computer, and get a card reader. Card readers generally offer less hassle and better performance than plugging in the camera; they free you from having to use special drivers or programs to access the images; and they don't consume power from the camera's battery.</p> <p>I only have experience at using the card reader in one printer (a model from a different manufacturer than yours) so I can't say in general that card readers in printers suck as a way of transferring images ... but the card reader in my printer absolutely sucks as a way of transferring images. It might be OK for printing directly from the card (which I never do; I edit all my images) but it's glacially slow at file transfers.</p> <p>Firewire is an alternative. It's fast. It's common in the Mac world but not in the PC world; USB 2 is far more common in PCs and PC-oriented peripherals, and so you'll generally get more bang for your buck from USB 2 on a PC (since you'll likely use it for a number of other peripherals as well). Plus, you'll have more selection of card readers etc. to buy; for instance, I looked at one major online vendor of computer parts, and of their 45 flash card readers, I found exactly two which mentioned Firewire.</p> Link to comment Share on other sites More sharing options...
jason_hall4 Posted September 3, 2007 Share Posted September 3, 2007 Card reader all the way. I remember haveing my first DSLR and trying to download from camera. After a long wait I bought a reader and never connected a camera to the computer since. My two cents worth. ;0) Jason Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now