steve_bellayr Posted June 25, 2007 Share Posted June 25, 2007 Does anyone know where Hama hoods may be purchased? I am looking for the rectangle ones that fit the Canonet QL 17 and Olympus SP 35. Also, would you know the exact size. I think it is 49mm. Link to comment Share on other sites More sharing options...
greyhoundman Posted June 25, 2007 Share Posted June 25, 2007 The SP is 49mm. The QL17 is 48mm. Link to comment Share on other sites More sharing options...
david_m Posted June 26, 2007 Share Posted June 26, 2007 Canon 48mm, Olympus 49mm Link to comment Share on other sites More sharing options...
larry h-l Posted June 26, 2007 Share Posted June 26, 2007 Some of the Hama hoods slip OVER the outside of the barrel and clamp down. If that is the type that you are looking at, you'll want the outside diameter of the barrel, not the thread sizes listed above. Link to comment Share on other sites More sharing options...
silvermoon Posted July 3, 2007 Share Posted July 3, 2007 Such rectangular hood tends to, unfortuantely, block a considerable part of the view when used on a compact rangefinder. Maybe you can try it before actually buying. Good luck. Link to comment Share on other sites More sharing options...
steve_bellayr Posted July 18, 2007 Author Share Posted July 18, 2007 Just picked up some hama hoods. Haven't used the cameras as of yet. Fitted a Cannonet and an Olympus 35 with the hoods. Much less intrusive than rubber ones. The Cannonet needed two very small pieces of sticky felt to fit perfectly. These were 49mm hoods. Also, put one each on an F3 and AE-1. They don't extend as far and fit very well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now