tom_bowling1664874721 Posted May 7, 2007 Share Posted May 7, 2007 I recently bought a Bronica S2, barely used, cheap and beautifully made. I've dev'd a couple of films from it and they seem to be the tiniest bit soft in the focus. Now, my other cameras are a Rolleiflex T with a Ziess lens and a Mamiya 7II. I know both of these are particularily sharp. But if there was a problem with the Bronica, where do you think it might be? Link to comment Share on other sites More sharing options...
kparratt Posted May 7, 2007 Share Posted May 7, 2007 I had a Bronica S2A, most of whose optics were similar if not the same. The prime lens, a 75mm Nikkor, was the best feature of the entire system. But I felt that some other lenses were not quite up to it. I've just done a "Google (Images)" on: Bronica S2 75mm Nikkor . There is quite a lot to see. Because the focussing mount is part of the body, there could be a problem there, or maybe just an early body not having modern anti-glare coatings inside. Which lens do you have? Kevin. Link to comment Share on other sites More sharing options...
Aoresteen Posted May 7, 2007 Share Posted May 7, 2007 Put it on a tripod and take a picture of a forest from 500 feet away (infinity). If it is soft I'd check the back and lens mount. If it is sharp, then I'd check the mirror & focusing screen to make sure that they are in alignment. If it needs repair send it to Koh's http://www.kohscamera.com/repair.htm Link to comment Share on other sites More sharing options...
karl_price Posted May 7, 2007 Share Posted May 7, 2007 The Bronica S2 and S2A had an issue with the focusing screen and it's location in the body. Essentially the foam it's mounted in compresses and moves the screen a little bit. The distance between the lens and the focus screen and the lens and the film plane are no longer the same. You see perfect focus in the finder, but the focus at the film is slightly off. It's easy enough to reshim the focus screen and correct the problem. Check your shots carefully and see if everything is out of focus or if the plane of focus is other than where you intended it to be. Secondly, and you know this, the S2 and S2A have a great slamming mirror to compensate for so really good handholding techique or a tripod helps a lot. Assuming no issues with the lens (cloudy, scratched, damaged), this is where I've seen the most focus issues. The nikkors are good performers. Google for Bronica focus problems and you'll probably find a step by step to reshim your screen. Cheers, Karl Link to comment Share on other sites More sharing options...
goemon Posted May 7, 2007 Share Posted May 7, 2007 First, congrats on the S2; it's a lovely camera and one of my favorites. Sadly as Karl points out one of the most common failings is that the spacing foam around the groundglass has a tendency to rot, throwing the focus off slightly. I would suspect this before I suspected the Nikkors. This is an easy fix; <a href="http://medfmt.8k.com/bronfocusfix.html">Robert Monaghan's web site has an article on the subject</a>. If you're not confident about fixing it, then probably any repairperson can do it even if they won't touch the camera itself. Link to comment Share on other sites More sharing options...
tom_bowling1664874721 Posted May 13, 2007 Author Share Posted May 13, 2007 Thank you very much gentlemen. I tried it on the tripod before posting so I'm pretty sure the problem is either in the camera or my head! The foam seems the best suspect. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now