beepy Posted September 11, 2006 Share Posted September 11, 2006 I'm starting to notice a dark area on one side of the frame when shooting my 1Ds MkII in manual mode at 1/250s at around f/16 with Speedotron strobes. I use Pocket Wizards to fire the strobes. Attached is a sample of the problem. <p> Am I misunderstanding the X-sync speed of the 1Ds MkII? <p> The thing is I've been shooting at 1/250s for a while and never saw this before - and I'm wondering if my shutter is having problems.<div></div> Link to comment Share on other sites More sharing options...
wilvoeka Posted September 11, 2006 Share Posted September 11, 2006 How old are the strobes? Older strobes have a sync voltage higher than 6v. If this is the case and you were not using a Safe sync voltage regulator the X-Sync connector in your camera may be damaged. Link to comment Share on other sites More sharing options...
mark u Posted September 11, 2006 Share Posted September 11, 2006 I'd put it rather that you are misunderstanding the rise time and flash duration from the Speedotrons. Canon's flash sync spec is relative to the duration from its own flashes, which is shorter than studio strobes. If you think about it, each shutter curtain has to cross the sensor, on average giving exposure of half the travel time (so the ambient exposure contribution totals the travel time of one curtain when the curtains are moving). The remainder of the ambient exposure comes from the period that the shutter curtains are completely open, which will be rather shorter than the nominal shutter speed. Flash durations greater than 1/500th will almost certainly be too long. Use a slower shutter speed with studio strobes. Link to comment Share on other sites More sharing options...
john_jovic Posted September 11, 2006 Share Posted September 11, 2006 I find the same thing with a 20D and 1dsmk2 when using studio strobes. It pays to do a quick test and find the shutter speed where illumination is completely even. 1/125 to 180 is usually fine, but always check. JJ Link to comment Share on other sites More sharing options...
roger krueger Posted September 11, 2006 Share Posted September 11, 2006 Mr. Benton is entirely mistaken, the 1dsII sync circuit is rated for 250v. Mark pretty much has it nailed, although I'll mention that the Pocket Wizards add a small amount of delay too. But even 1/200th will likely work Link to comment Share on other sites More sharing options...
m3rdpwr Posted September 11, 2006 Share Posted September 11, 2006 I myself thought 250v was the limit. However, I'm hearing that camera's like the 20D are 9 volts. The 250v rating is the max voltage input to the strobe system as some older are as high as 350v battery supply system. I realize we are talking 1d's here, but just thought I'd share... -Mario Link to comment Share on other sites More sharing options...
wilvoeka Posted September 11, 2006 Share Posted September 11, 2006 From the manual(I do not own a 1DsMII so I had to look it up). The Flash Sync for studio strobes is 1/125, and it also says that the camera should not be connected to units using 250V or higher. So it would seem 249V is fine but not 250V? The info is on page 100. Link to comment Share on other sites More sharing options...
steve_dunn2 Posted September 11, 2006 Share Posted September 11, 2006 <cite>However, I'm hearing that camera's like the 20D are 9 volts.</cite> <p>The 20D, as with many other recent EOS bodies, is good up to 250V, both for the hot shoe and for the PC.</p> Link to comment Share on other sites More sharing options...
beepy Posted September 11, 2006 Author Share Posted September 11, 2006 Argh... yeah, yeah, yeah... I need to curl up and re-read my manual - didn't mean to waste people's time... Sorry for the lameness. But thanks for the responses - I will start re-reading tonight... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now