Jump to content

todd_b1

Members
  • Posts

    63
  • Joined

  • Last visited

Reputation

0 Neutral
  1. <p>Ah, many thanks. It turns out the lens cap I bought doesn't fit, that's why I was confused. The viewing lens bayonet works fine, but there is no "snap" into the taking lens, just sits there. (The cap says Minolta but apparently not for an Autocord). </p>
  2. <p>I am going to feel stupid here...<br> What is the purpose for the hinge in the lens cap for TLR camera? I have the Minolta Autocord and just came across an original lens cap. I use one of the inexpensive plastic lens caps. Why does the original one fold? To cover one lens and leave the other open? To fold and thus be smaller?<br> I feel a "d'oh" coming in...</p>
  3. <p>Many thanks, Luis, great to hear! I'm glad you got it working in the end. I never was able to determine why some people were having problems. :(. I am finishing a new version that cleans up some things and adds a "darkroom mode" (I don't know if you are doing any printing). If you would be willing to play with new versions before they make it into the store just let me know and I can add you as a tester.<br> Next up is a way to do backup, to prevent exactly what you ran into. If you get the chance could you send me a message? I am thinking either iCloud, Dropbox, or simple email. Would any of these work for you? Any other ideas?</p> <p>Todd</p> <p> </p>
  4. <p>Thanks MP. Frustrating when one time it works and another time it doesn't. I think my advice to people having trouble will just be to install again. Cheers!</p>
  5. <p>Many thanks Marcelo, this is great! Can I ask a follow-up question? If you delete the app and then install it again does it still hang when activating voice control (i.e. can it be reproduced)? I am tracking down a physical iPhone 4 (my son has one), in theory there shouldn't be a problem. Thank you very much for the detailed information, I am working to emulate the exact build and hardware. THANK YOU.</p>
  6. <p>Thanks, Jose, I really appreciate your help. I am "glad" you had a problem with voice so that I can look into it. </p>
  7. <p>Hi,<br /><br />I have a development timer app for iOS on the App Store, it has been there for some time (it's free). I just released a completely new version and, unfortunately, am hearing from a lot of people that the app crashes when they first open it. I can't reproduce this, I have really tried.<br> I'm hoping to find someone to help debug. It would involve some back-and-forth to try new versions and send some files from the iPhone. It's a little bit of a pain.<br> If interested please let me know, I'd really appreciate it and you would be helping a broader user community. The only prerequisite is that the app crashes for you when you try to install it!<br /><br />If interested this is the link to download it on the App Store. Normally I hope there is no problem, but in this case I hope it crashes for you so I can fix it for others.<br /><br /><a href="https://itunes.apple.com/us/app/develop!-film-development/id568421864?mt=8" target="_blank">https://itunes.apple.com/us/app/deve...568421864?mt=8</a><br /><br />Todd</p>
  8. <p>Hi Ellis, on the light table I think the densities look OK, there is some detail there. That said I am usually completely wrong. I'll scan the contact sheet when I can, my scanner can handle that (just not negatives). Massive overexposure would break out of the frame like that?</p>
  9. <p>Hi,<br> I am noticing that there is some "bleeding" on several of my negatives. Please take a look at the attached image.<br> -- The negative densities are OK. I don't know why these look all blown out, so please try to ignore that. (This was scanned on a plain-jane scanner with sleeved negatives, I just wanted to make sure I captured the defect).<br> -- I've boxed in three areas where you can see the image bleeding outside of the frame: top of both frames bleeding off the top (and off to the right for the second image). Upper left of second frame bleeding out.<br> Is this my processing?<br> Many Thanks!<br> Todd<br> <img src="http://i.imgur.com/PlSq4L5l.jpg" alt="" width="640" height="283" /></p>
×
×
  • Create New...