sam_ng2

Hello everyone, I have a Hasselblad PME meter, the original one I believe. The meter is responsive to light, and reading changing with light level, however does not change with the ISO or aperture dial. Anyone familiar with this problem and any suggestion how I should tackle this? Thank you.

<p>Hi everyone<br> <br />I have not used this lens for a while, but today when getting it out, I noticed it looks unusual.<br /><br />The position of the the cocking screw seems wrong. When the shutter open it is at this position:<br /><br /><a href="https://dl.dropboxusercontent.com/u/5966748/shutteropen.jpg" target="_blank">https://dl.dropboxusercontent.com/u/5966748/shutteropen.jpg</a><br /><br />When I tripped the shutter, the screw is at this position:<br /><br /><a href="https://dl.dropboxusercontent.com/u/5966748/shutterclosed.jpg" target="_blank">https://dl.dropboxusercontent.com/u/5966748/shutterclosed.jpg</a><br> <br />The shutter still works, in the way that all the time is correct (1s, 1/2s etc..). However when I recock the shutter (using a screwdriver), it doesnt feel normal. the cocking screw doesnt "spring back" if I pull out half way like other lenses. It seems like a spring connecting to this cocking screw is broken. However it looks like it can still be mounted on the camera. I have not tried it on the camera yet, afraid it would jam. </p> <p>Could anyone advise what step I should take now. Many thanks!</p>

<p>Hi,<br> I havent used my Contax T2 a while (less than a year), and today when I put a new battery in and turned it on, the film winding mechanism buzzed for about 2-3 seconds (without film) and film counter flashed "FF". Every time I pressed the shutter, it would make the same sound, shutter didn't fire. When it put a roll of film in, the same things happened. Film had been taken up. It seems that there's something wrong with film winding mechanism. I just wonder if anybody has experienced the same error and if there's anything I can do about it.<br> Thank you, Sam</p>