Good news for 2000/203 owners. The new CVF50 2 does not require any modifications. Use the CFV50c on the 500s and get the CVF50-2 for the 2000FW and 2003FCW.
Hasselblad CFV50C ll:
(Page 53)
5.11 THE CFV ON A 200 OR 2000 CAMERA
Previous generations of the CFV required a small modification to the camera to work. This is no longer necessary but if
you have a modified 200-camera you should use the 200 Modified setting. Unmodified 200-cameras must use the 200 setting. A 2000-camera requires the 2000 setting.
Note!
A camera that has been modified is identified by a label on the left side as shown in (A).
Note!
The camera cannot read the ISO value set on the CFV. If using any automatic mode on the camera, please set corresponding ISO value also on the camera.
Note!
You can release the camera even if the CFV is not ready for a capture. Please make sure the status LED on the CFV is green before releasing the camera.
The basic operation is described in the quick start chapter on page 16.
● Depending on your camera, set camera body type to 200 Modified, 200 or 2000 as described on page 73.
START LIVE VIEW
1 Set B mode on the lens. If using an F type lens, no special setting is required.
2 Use a lockable cable release and set it to lock mode (B).
3 Activate live view from the Control Screen (LV).
4 Release the camera with the cable release.
5 Press the Menu Button or Play/On-Off button to end Live
View.
6 Open the cable release lock.