No, do NOT try to buffle anodized surfaces!!!!
This surface is only about .001 mm thick, and if
you buffle hard, you will just remove it, having...
Actually, who ever will try to force a 9.5 mm wide strip
of film through his minox will damage it. This damage
is serious, the maximum width...
In principle you may use the EC; you will
have to build a bino-adapter on your own.
Even with simple tape it should work....
I agree with Martin. First thing should be used or
new old stock minox enlarger. Next thing could be a contact
to the minox factory. These...
no, not tried yet.
but: there is a UV-filter for the Minox 35,
and this is made (as far as I know) from
Heliopan. This company do make all...
In general this might be a resonable way to get a short focal lenght
1. I agree with Martin: it is better to repair the minox
Yes, the Kodak T400CN has some nice pros for being used in the
Minox. The grain is very uniform, so it is clearly to see,
but not disturbing in...
As far as I know, the lenses are quit different
and cannot be compared directly, because
-the TLX-lens is a f15mm/3.5 lens with variable...
For development of very fine grained, high contrast "doku"-material
such as TechPan or the Fuji HR a more smooth development
can be archieved...
This site is dedicated to minox photography
with a final finishing of the photo on the screen.
when looking to the negatives made with my
three minoxes, each film has a signature
of the camera: exposed with the A (III S),
This seems to be a question of great interest.
In germany, the Minox has the long tone at the beginning.
So, pronounce the "i" like in...
Agfa and also Ilford suggest to keep the "wet time"
of RC-papers as short as possible and therefor not to wash longer
than 5 min. The short "wet...
If you have a sharp negative, no matter which minox it
was made with, you have the chance to make a sharp print.
If your negative is not sharp,...
Separate names with a comma.