luka_pogacar

<p>Hi.<br> Iam wondering if you guys are focusing with same situation: for example when you are using internal flash with lens VR on and when take the photo the VR turns off imediately even if you are still holding the shutter release button half pressed. This is not happenig with external flash.<br> Thanks for help, Luka</p>

<p>I asked that coz I think that have accidentally left camera sitting with live view on, and after several hours I saw that camera is in standby mode. So wasn't sure what happens if you left live view on for multiple minutes according to sensor getting hot? But on internet I can't find anything related to sensor being fried in live view mode.<br> Luka</p>

<p>Hi Iam just wondering if anybody knows what happens if I accidentally forget to turn off live view. Does the function turn off for itself or it will drain the battery out and what about overheating?<br> Thanks, Luka</p>

When shooting video with lens which nas an aperture ring or in live view the camera seems to meters normally coz if you changing the ring the exposure compesates immediately. So I have figured that you can shoot videos or doing live view with an aperture ring, but what bothers me is that when I set the lovest F in camera and go in to live view the actual F isn't that what I choosed in camera but is f11 (sigma 105mm f2.8). And I have discovered one other thing too, so if I set the F number for example at f8 and then I press the aperture preview button and if Iam looking from the other side in the lens aperture and rotating the aperture ring while holding the preview button I can see that that at f8 choosen by aperture ring is quite moore open than choosen by camera, that matters for all f numbers not only for f8, but if I make the test shots within all f numbers and exposure compensation to 0 all of the shots are fine. Thanks, luka

<p>Hi, I was playing with live view and aperture ring with my d90 and sigma 105mmm f2.8. I understand that the camera won't comunicate with lens aperture ring at other setting than f32.<br> So I thought that if I go in to manual or A mode and set the maximum F number with camera and when going in live view I tought that the aperture would be at actual F number written on the camera screen, but isnt: example I set he camera at F 32 then go in to live view and start to turning aperture ring and the actual aperture is at F 11 and not F32 as stated in the camera. What is the reason that the camera won't close the aperture at maximum F number? Coz if Iam stepping from F11 down everything is like it should be. And I have fiugured that the lowest actual F number in live view depends on lens attached.<br> I was thinking that maybe the reason could be that the camera limit lowest F number coz of too much light loss-<br> Can someone help me, thanks Luka</p>

<p>Hi I just wanted to try the d90 AF dynamic area and I can't get it working. As I read in the manual the af points at AF-C should follow the subject if starts to moving, but the selected point just focus on the background if subject leaves, it does not follow it like in 3d tracking mode. Is that normal or I just can't get it working. Help please.<br> Thanks, Luka</p>

<p>Hi I have just got new dslr with external flash and cos Iam novice and had flash set to manual at full power while making photos at slow shutter speed the picture came way overexposed almost white, can this do any harm to sensor? the shutter speed was 1/60, f3,5 and external flash on manual at 1/1 power. do I need to worry about?.<br> Thanks, </p>