lepapawu

Coming into the digital world, the newer 2.4 GHz wireless mic becomes more and more popular in filmmaking and vloger. The following are some good-sale 2.4GHz wireless mics, let’s compare their differences. Rode Wireless GO The Rode Wireless GO measures just 1.7in x 1.8in x 0.7in in size and weigh 1.1 oz. It’s convenient for your taking outside. Offering secure Series III 2.4 GHz digital transmission, the Wireless GO includes one transmitter and one receiver. You can mount the Wireless GO on your camera. Courtesy of Rode's optimized transmission algorithm, the Wireless GO provides a range of up to 70meters, and bolsters signal dependability to mitigate drop-outs in crowded short-range environments. Both the transmitter and receiver have built in batteries that you can charge with the included USB-C cable. You can use the mic for 7 hours. The Rode Wireless GO equips a pouch, 2 windshield, 2 USB-A to USB-C cable and a TRS cable. With the TRS cable, Rode Wireless GO can connect with your smartphone and camera. SYNCO WAir-G1(A2) Both 3.5mm TRS and TRRS output cables are included, so the SYNCO WAir-G1(A2) system will work perfectly with your camera and smartphones. You can achieve the real-time monitor through a 3.5mm TRS headphone jack. With two output modes-mono / stereo, the entire recording system of WAir-G1(A2) restores your original sense of orientation and distribution. In mono mode, the sounds captured by each transmitter are combined into one audio track. When it is stereo, 2 sounds are separated to either left or right track, trying to emphasize the presence, layering, and transparency of sound. To restore the subtle changes in sound, WAir-G1(A2) refines 180Hz optional low cut filtering out specific low frequency noises. And the 0-4 level receiver gain settings with adjustment range up to 8dB allow simple and effective optimization of signal levels. WAir-G1(A2) equips 2 lavalier microphones, charging cable and a carry bag for outdoor shooting. Saramonic Blink 500 B2 With a 3.5mm TRS to TRRS cable, Blink 500 B2 can work well with your smartphone and camera. Besides that, Blink 500 B2 provides two USB-C charging cable and two lavalier microphones. Since the Blink 500 RXDi is a dual-channel receiver, it can simultaneously handle two Blink 500 TX wireless transmitters without the signal interference. It is suitable for more than one device you working in the same environment. Within the 2.4 GHz spectrum, the Blink 500 boasts automatic channel hopping to mitigate noise and dropouts at a line-of-sight distance of up to 50 meters in open spaces. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the units in the field with portable USB battery packs. Comica BOOM X-D2 Comica BOOM X-D2 has many accessories: two 3.5mm mic audio input cable ,two wind muffs,one 3.5mm TRRS cable,one 3.5mm TRS cable,one USB-C charging cable, and one reset pin. If your camera does not have a headphone jack, you can make the Real-Time monitor the sound from the receiver with the 3.5mm headphone jack. The 2.G Hz system delivers reliable transmission with a clear sound at a distance up to 50 meters with the Auto frequency. BOOM X-D2 offers you two switch of mono or stereo on the receiver to choose, which allows you to adjust each level individually later in post. (Please note that smartphone can not output stereo audio). In contrast with Wireless Go and Blink 500 B2, BoomX-D2 transmitter is designed with internal and external microphone. The external microphone is designed with an elastic fixing clip that prevents the falling off from your moving or shaking of shooting. If you have better idea, welcome to leave your comment！

The market of microphones is ever-expanding, and it can be hard to figure out exactly which is the best choice for you. Today, we have SYNCO Mic-M3 here. Coming in at $59，is the SYNCO Mic-M3 the right mic for you? Now, let's unbox it. In the mic body is the 3 level gain adjustment(-10dB，0dB, 10dB) for improve the input signals. When you are recording in a very noisy environment, you can increase the gain to -10dB to make your sounds clearly. And in quiet environment，you can adjust the gain to 10dB to reduce the sound distortion. The switch has three positions — off, on and low cut. With the Adjustable button, pushing to the top is the low cut. That means it can eliminate most of low frequency noises caused by airflow, shake, electrical current, traffic etc. When you are shooting in a very noisy environment, you can use this low cut filter to gain more clear sound without unwanted rumble. The LED working indicator in SYNCO Mic-M3 brings you greater convenience. Once the battery is installed, the green light will be on. Powered by two AAA batteries, M3 supports you to film for continuous 30-50 hours. With 3.5mm TRS and 3.5mm TRRS cables, M3 applies to your camera, smartphone, etc. A PA-made shock mount can reduce the unnecessary shaking and the noise caused by movement. 1/4” threaded hole in shock mount allows it easy to install on cameras. Together with the 3.5mm output interface, you can just plug in the headphone to check the recording status in real time and make necessary adjustment promptly. The mic casing is machined from ABS. So it is very light with the weight of 52g. M3 equips a black canvas pouch for your shooting outside. The professional canvas pouch protects your microphone from scratch very well. So, I fired up the mic. I did some recordings with the mic on my camera. Once I moved on to running some video tests, I found that the mic was crystal clear, responsive and overall. The M3 has a wonderful, warm sound. And there has less noisy. Of course, the hyper-cardioid pattern picks up less ambient sound.

The market of microphones isever-expanding, and it can be hard to figure out exactly which is the best choice for you. Today, we have SYNCO Mic-M3 here. Coming in at $59， is the SYNCO Mic-M3 the right mic for you? Now, let's unbox it. /attachment%5D http://C In the mic body is the 3 level gain adjustment(-10dB，0dB, 10dB) ）for improve the input signals. When you are recording in a very noisy environment, you can increase the gain to -10dB to make your sounds clearly. And in quiet environment，you can adjust the gain to 10dB to reduce the sound distortion. ‪http://C The switch has three positions —off, on and low cut. With the Adjustable button, pushing to the top is the low cut. That means it can eliminate most of low frequency noises caused by airflow, shake, electrical current, traffic etc. When you are shooting in a very noisy environment, you can use this low cut filter to gain more clear sound without unwanted rumble. ‪ The LED working indicator in SYNCO Mic-M3 brings you greater convenience. Once the battery is installed, the green light will be on. http://C Powered by two AAA batteries, M3supports you to film for continuous 30-50 hours. http://C With 3.5mm TRS and 3.5mm TRRScables, M3 applies to your camera, smartphone, etc. http://C http://C A PA-made shock mount can reducethe unnecessary shaking and the noise caused by movement. 1/4” threaded hole in shock mount allows it easy to install on cameras. http://C http://C Together with the 3.5mm outputinterface, you can just plug in the headphone to check the recording status in real time and make necessary adjustment promptly. The mic casing is machined fromABS. So it is very light with the weight of 52g. http://C M3 equips a black canvas pouch foryour shooting outside. The professional canvas pouch protects your microphone from scratch very well. http://C So, I fired up the mic. I did somerecordings with the mic on my camera. Once I moved on to running somevideo tests, I found that the mic was crystal clear, responsive and overall. The M3 has a wonderful, warm sound. And there has less noisy. Of course, the hyper-cardioid pattern picks up less ambient sound. http://C http://C