jolyfabrice

Hi Henry I try to find you on the web as I have some questions about Minolta Dimage Scan Multi I/II to ask you. If you read this, thanks to contact me directly or via this forum. Many thanks, regards, Fabrice

Hi, The Minolta Scan Multi is only SCSI, not firewire. I try to use an Adaptec 2906 and a DB25 cable. It's possible in the documentation. The scanner seems to be well recognized but I always get black scans. The CCFD tube is always on, I can see it. As I'm testing a Windows 10 x64 board & drivers, I do it also under Win 7 x64 but have exactly the same trouble. Seriously I don't know what's happened. Is the tube can be out of order and still light? Is there another well known problem on this scanner? All the leds are green, all seems working well but I can't get any picture. I tried Minolta scan & Vuescan software but both get me black pics. Seriously I'm about to get new CCFL tubes and resistance to rebuild the FL-100 but it may be another problem. I have 2 units Minolta F3000 with the same trouble. Any help can be great appreciated ;) Thanks, Fabrice

Hello, I have a problem with my Minolta Scan Multi I. The FL-100 light seems to work but I only get black images. I have not the blinking red light. Is it possible my FL-100 still needs to be repaired ? It also may be a communication with SCSI board, cable or other thing. I run under XP to get more compatibility. I have a lot of SCSI boards : 2904, 2930, 2940 and Tekram 315U. The 2nd problem I get is to use a correct Adaptec board to be recognized under Window$ 7x64 and 10 x64. I have Vuescan Pro and the correct Minolta software. Many thanks if you can help me to find what's wrong. I'm in Lyon, France. Fabrice