Hello all!
So diving into the wonderful world of Rangefinders, I've found myself with a keen interest in Yashica's (I'm already in love with the Electro 35) But I wanted to check out something a little more manual.
I got a Yashica 5000, which, seemed in relatively good condition, shutter was a little sticky, no cosmetic damage etc.. However, the shutter seems to be stuck in a 'cocked' position.
So I set out to clean the shutter mechanism, following various advice from forums, blog posts and other places.
Checking things over, I needed to ensure that the shutter release was still connected to the shutter mechanism.
This is what I see when firing the shutter
https://www.youtube.com/watch?v=DbhwLUcOiCg
I have removed the self timer mechanism as this seemed to be locked up and unreliable, I still see the symptoms in the video posted above. the gears for the shutter speed selection all seem to be moving freely.
The shutter should be moving similar to this as I believe the shutter in the Yashica MAT TLR is very similar to the one in the Lynx
I'm scratching my head over this one, is there a way to force the shutter to fire? To at least confirm that the blades themselves are not causing the issue?