fernando_garcia4

dear Alan, thank you. I clicked on the link, and it redirected to flickr. I click again on the link in the flickr post but it says that this page not exist. Thanks again

Hello, I have an old DURST CM 50 color analyzer. I never used it. But today I have try to know how to use it. It hasn't user manual. I Insert four LR44 batteries, and it seems to run. I think this CM 50 can hel to to find the exposure time when I enlarge copies. I try to find the user manual in google, but I don't find it. Could somebody help me to get this user manual? Thank you very much.

Hello, I think that problem is fixed. I Removed the focus screen from the camera to know the right model. It's a G2 screen. This table - pag 24 (https://www.cameramanuals.org/nikon_pdf/nikon_f2_finder_dp-1.pdf) says that with G" screen, 50 mm f/1.4 needs a +1/2 correction, and 135 mm f/3.5 needs a -1 correction. So I adjusted trim screw of my DP-1 using 35 mm according my sekonic meter. Now, when I shot 135 mm (-1 stops adjusting) it's fine. Thank you very much everybody!!

Hello, really , it's very strange. I afraid that 135 mm is the problem. For instance, I mount 50 mm, meter with DP-1 and Sekonic. Same speed and f DP-1 and Sekonic (for example: 250 f/5.6) I change to 28 mmm. Same speed and f I mount 135 mm, and I need 2 or 3 more stops I've checked 135 mm, and I can't see any problem. It indexes when mounting. Thank you

Yes. The metering is right for 50 mm. It's a F/1.4 Thank you

:-( I followed the Glen Walpert tutorial about DP-1 adjust. The damaged is done thanks anyway

Hi, Ben, Yes. Always, after mount lens, I move right-left the f ring to index lens. Thank you!!

Hello everybody, first at all, congratulations for this forum. I've a F2 with DP-1, with three lenses (50 mm, 28 mm and 135 mm). The problem is the measurement of DP-1. If I have a right read with 50 mm, there are a 2 or 3 stops of difference with the 135 mm. Same light, same conditions. I've adjusted the DP-1 with trim screws and my Sekonic, changet batteries, but it remain the same. Please, do you have any idea about the reason? Thank you very much

<p>Dear all,<br /><br />at the first, Happy new year!<br /><br />I've just begin this year,and find the first error in my F4:<br /><br />I've a F4+MB21 a long time ago. It's my favorite cam, and I hope use it for a long time.<br /><br />Yesterday i was using it and I got no meter readings on the lower LCD, but the exposure values (The letter "p" + shutter speed) appeared on the upper LCD where the frames counter usually is. This is a random behavior, and it is the first time I notice it. Apparently the camera works fine.<br />Do you know the reason of this error?<br /><br />I'll be grateful if any of you could give me information about this error<br /><br />Best regards<br /><br />Fernando</p>