Don Harpold

test it worked This is a second account as it sometimes doesn't work

Hello Stric First, thanks for the comments I have an Epson V800 and I believe I used the Epson software I bought the scanner from Epson, it was a refurbed special

Hello A few from a Fed2 Kentmere 100 in PyrocatHD

Hello Here are a few old ones from the Hassellblad various films and developers

Thanks Bill What temp? Rick is using 75 degrees I have always used 68.

Hello Christopher Thanks for the comments, I may have to go back in the archives to post more but I have a roll of Rollei RPX 400 in the Hass 500cm and I am waiting for some batteries for the PME5 I just got to give it a test. So when things settle down I am going to put a roll of Ferrania in the Leica to test out the D96.

Hello Bill, Sorry to just lurk, so here are a couple from my Leica IIIg with the Elmar 5CM 2.8 and using Rollei Retro 80S developed in Rollei Supergrain 1-12 I may have posted a few in another forum so excuse the duplicates Thanks Don

Thanks Rick I asked about the dilution last time, so sorry for the repetition.

"I made minor adjustments to ISO settings and development times," Hello Rick, Very nice images, would you share the adjustments? Thanks Don

A few more from the Olympus XA with Kodak 5222 XX in D96.

A few from the new to me Olympus XA with Kodak 5222 XX in D96. I missed on the focus and settings on a few but like the developer so far, first time using, got a bottle for the Ferrania.

Thanks Rick

Hello Rick Are you using 1-1-100? and what time and temp? Thanks Don

Hello These are from the Leica IIIg with the Elmar 5CM 2.8 and using Rollei Retro 80S developed in Rollei Supergrain 1-12 The sharpness is crazy and as you can tell by the first photo it does not like really contrasty scenes, blows the highlights, there were three that were unusable. I like it otherwise, will just have to meter better for the highs or adjust the time or agitation?

Hello These from my recent thrift store pick up, a Minolta XG1 with 50mm Rokkor-X 1.7, the shutter was cocked but would not fire so I checked Butkus and the manual stated it would not without batteries, so I asked what they could do on it and they took it down from 10.00 to 7.00, I took it home put a couple of batteries in and works fine. HP5 in HC-110 B Some came out a little over but ok for a first try. Thanks Don